Sakthi Electrical Control

Additional Information:

• Delivery Time: 7 TO 20 Days

 Digital Phase Converter creates a three-phase power supply from a single-phase supply. A Digital Signal Processor (DSP) is used to control power electronic devices to generate a third leg of voltage, which along with the standard, single-phase voltage from the supply creates a balanced three-phase power supply.

AC power from the utility is converted to DC, then back to AC using insulated-gate bipolar transistors (IGBTs).^[2] This conversion process allows for the generation of the third leg from the existing power supply.

In one type of digital phase converter, the input rectifier consists of IGBTs being used alongside inductors to create the third leg of power. The IGBTs are controlled by software in the DSP to draw current from the single-phase line in a sinusoidal fashion, charging capacitors on a constant-voltage DC bus. Because the incoming current is sinusoidal, there are no significant harmonics generated back onto the line as there are with the rectifiers found in most VFDs. The controlled rectifier input allows power factor correction to take place.

The second half of the digital phase converter consists of IGBTs that draw on the power previously stored in the DC bus to create an AC voltage that is not sinusoidal. It is a pulse-width modulated (PWM) waveform very high in harmonic distortion. This voltage is then passed through an inductor/capacitor filter system that produces a sine-wave voltage with less than 3% total harmonic distortion (standards for computer grade power allow up to 5% THD). By contrast, VFDs generate a PWM voltage that limits their versatility and makes them unsuitable for many applications. Software in the DSP continually monitors and adjusts this generated voltage to produce a balanced three-phase output at all times. It also provides protective functions by shutting down in case of utility over-voltage and under-voltage or a fault. With the ability to adjust to changing conditions and maintain voltage balance, a digital phase converter can safely and efficiently operate virtually any type of three-phase equipment or any number of multiple loads.

Since Digital Phase Converters are solid-state designs, there are little to no moving parts except for cooling fans. In turn, this allows digital phase converters to be fit into small packages and operate between 95% and 98% efficiency. These converters also do no draw power when idling, reducing overall costs and increasing longevity.

• Two phase to Three phase Converter suppliers in Tamil Nadu.

• Two phase to Three phase Converter suppliers in Kenya.
• Two phase to Three phase Converter manufacturers in India.
• Two phase to Three phase Converter manufacturers in Chennai.
• Two phase to Three phase Converter manufacturers in Cuddalore.
• Two phase to Three phase Converter manufacturers in Sivakasi.
• Two phase to three phase converter Villupuram.
• Two phase to Three phase Converter manufacturers in Coimbatore.
• Two phase to Three phase Converter manufacturers in UAE.
• Two phase to Three phase Converter manufacturers in Nigeria.
• Two phase to Three phase Converter manufacturers in Madurai.
• Two phase to Three phase Converter suppliers in India.
• Two phase to Three phase Converter supply in India and all over World.

• Two phase to Three phase Converter manufacturers in Tamil Nadu.

which can convert ordinary Two-phase power to industrial three-phase power. After through Beta series Two-phase to three phase converter power conversion, the three-phase power output is standard pure sine wave, the harmonic distortion rate (THD) is less than 3%, totally meet the national standards of Three-Phase power quality, applicable to all types of load.
The Beta series Two - Phase to Three - Phase converter can solve production inconvenience because of some areas with the three-phase electric power restrictions, also solved some user requirements that can’t apply for the three-phase electric because of space limitation.

Technical Features:

* Using the sixth efficient IPM power module from Mitsubishi with stable performance and high efficiency. Its service life could reach 15-20 years.

* Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable.Top phase converter manufacturers in india,  It’s service life can up to 15 years or more.

*Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

* Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.

*Adopted low frequency isolated transformer, high conversion efficiency and stable performance.

* Output  4 wire converter  AC Power is suitable for all types of home appliances, electric tools, electric motor.
 
 *  Output 3 wire converter AC Power is suitable for only electric motor.

* Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices.

* Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated.

Our Tamil Nadu Supply Network

Coimbatore, Erode, Salem, Karur, Namakkal, Trichy, Thanjavur, Kumbakonam, Mayiladuthurai, Panruti, Cuddalore, pondicherry, villupuram, Chennai, Vellore, Ambur, Krishnagiri, Hosur, Madurai, Sivakasi, Rajapalayam, Virudhunagar.

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kochi, Ernakulam, Palakkad, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Maharashtra, Andaman and Nicobar Island.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia Nigeria, UAE, Kuwait, UK, Qatar, Congo, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Angola, Mozambique, Peru, Singapore, Dubai, Lagos, Bahrain, Uganda, Australia, USA, New Zealand.

Three-phase power is not always available. To keep cost down, often only one phase is fed from a street transformer to a house. There are two options, if an industrial machine has to be connected. Installation cost for three-phase power lines may be high. Single to three- phase converters are another good solution. phase convert Two phase 415V into three phase 380V, 400V or 415V.

We are supplying Sakthi make converter for 2-phase to 3-phase power to agriculture power line industries and agriculture farms.

2 to 3 Phase Converter 10HP Manufacturers in Coimbatore

The SAKTHI Two-phase to Three-Phase Converter, adopted AC-DC-AC circuit structure and using SPWM modulation control technology, 

which can convert ordinary Two-phase power to industrial three-phase power. After through Beta series Two-phase to three phase converter power conversion, the three-phase power output is standard pure sine wave, the harmonic distortion rate (THD) is less than 3%, totally meet the national standards of Three-Phase power quality, applicable to all types of load.
The Beta series Two - Phase to Three - Phase converter can solve production inconvenience because of some areas with the three-phase electric power restrictions, also solved some user requirements that can’t apply for the three-phase electric because of space limitation.

Technical Features:

* Using the sixth efficient IPM power module from Mitsubishi with stable performance and high efficiency. Its service life could reach 15-20 years.

* Using the fifth generation efficient IPM intelligent module from Japanese Mitsubishi, high efficiency and stable performance. It with powerful protection function, the protection for short circuit, over load, over temperature is more safe and reliable.Top phase converter manufacturers in india,  It’s service life can up to 15 years or more.

*Two kinds of start mode: Reduction Voltage Start and Variable Frequency Start. Customers can set start mode according to the type of their load. This function is very convenient for users and also reduce frequency converter’s usage, which reduced the cost of equipment investment, easy to connect wires and control.

* Pure sine wave output with good transient response, little harmonic distortion, higher conversion efficiency and stable output voltage features.

*Adopted low frequency isolated transformer, high conversion efficiency and stable performance.

* Output  4 wire converter  AC Power is suitable for all types of home appliances, electric tools, electric motor.
 
 *  Output 3 wire converter AC Power is suitable for only electric motor.

* Converter has the function of filtering the grid disturbance and interference at the same time, which is a good performance of stabilized voltage and frequency power, to provide a more stable and pure power supply environment for the backend devices.

* Safety and reliable, the input single-phase electric and output three phase electric is complete electrical isolated.

Our Tamil Nadu Supply Network

Coimbatore, Erode, Salem, Karur, Namakkal, Trichy, Thanjavur, Kumbakonam, Mayiladuthurai, Panruti, Cuddalore, pondicherry, villupuram, Chennai, Vellore, Ambur, Krishnagiri, Hosur, Madurai, Sivakasi, Rajapalayam, Virudhunagar.

Our India Supply Network

We are looking for queries Beta Power Equipment from Tamil Nadu, Kochi, Ernakulam, Palakkad, Kerala, Bangalore, Karnataka, Andhra Pradesh, Goa, Maharashtra, Andaman and Nicobar Island.

Our Export / Global Network

Kenya, Muscat, Egypt, Tanzania, Ethiopia Nigeria, UAE, Kuwait, UK, Qatar, Congo, Saudi Arabia, Malaysia, Philippines, Sri Lanka, South Africa, Yemen, Benin, Angola, Mozambique, Peru, Singapore, Dubai, Lagos, Bahrain, Uganda, Australia, USA, New Zealand.