Control Panels

Product Details:

The Sakthi is installing the digital energy meter for industrial consumers having load 20 HP and above, which has the provision of showing the PF and insisting to maintain the average power factor above 0.90 for LT and HT consumers.

 

For maintaining the power factor according to the load factor, proper capacity of capacitors is to be connected. The value of capacitors to be connected will vary with respect to load and its existing PF. There are two ways to maintain PF-

 

Fixing of capacitor at the load end permanently or at the mains. Generally which is recommended for the fixed load like pumps, fans etc. and it is not possible for the load which has variations in the load and PF.

 

The power factor can be maintained by installing Automatic Power Factor Control Panel (APFC Panel).

Product Details:

Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor.To get the best prices,contact us.

Product Details:

We put forth to our clients high performance Power Factor Correction Panel, which is widely valued for not only maintaining a high power factor but also eliminates the need for regular manual intervention. This panel is of great use to minimize loss and wastage of energy and heavy penalties by electricity boards. Our APFC panels are fully integrated with suitable APFC relay, switchgears, and capacitor banks to offer a complete solution to effectively eradicate lagging power factor. We offer these products in both manual as well as automatic control.

Product Details:

Details:

• These panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machineries, cooling plants and other devices installed. There is always a possibility of damage of these equipments if power fluctuates. In case of fixed loads they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.
• We are manufacturing a wide range of Power Factor Correction Panels / Power Factor Control Panels that is available in auto and manual variants. These products are used to actualize zero voltage switching of capacitors and removing switching transients. By sensing the load current through the current transformer installed in one of the three phases, the power factor helps in calculating the load power factor. This is necessary to take the voltage feedback from the balance in two phases. Owing to the use of inductive equipment and resistive components inside the electrical components, power loss occurs due to the inductivity, which results in less utilization of power.
• Being an expert and experienced APFC System manufacturer supplier in Faridabad, India, we meet out several customer’s Auto Power Factor Correction Panel / APFC Panel demands with precision.

 

Why to Use Our Panels? :

• Our panels are made of good quality materials in accordance with industrial quality standards and latest technology.
• The panel casing is of strong weather-proof galvanized stainless steel and is durable, efficient and highly functional.
• These ensure durability, high performance, trouble free operation, less maintenance and low power consumption.
• We adhere strictly to stringent quality checks required by various industries like telecom, electrical and electronics industries

Product Details:

Details:

• Automatic Power Factor Control Panels are mainly used for the improvement of Power Factor. Power Factor can be explained as ratio of active power to apparent power and it is a key factor in measuring electrical consumption. Everyone knows that how costly electricity has become in present time
• APFC Panel has microcontroller based programmable controller which switches the capacitor banks of suitable capacity automatically in multiple stages by directly reading the reactive load (RKVA) which works in the principle of VAR sensing tends to maintain the PF to 0.99 Lag. The capacitor banks may be selected in number of stages as 4/6/8 according to the load pattern. Install APFC Panel to avoid penalties and enjoy the benefits automatically.

Product Details:

Panel boards Sakthi is the industry leader in new panel board products, providing features, ratings, and performance that consistently meet the needs of specifiers, consultants and contractors. Products are ideal for new construction and systems upgrades in commercial and industrial facilities.

Sakthi Electrical Control is an esteemed manufacturer and supplier of Power and Automation Control Panels that comprises of Motor Control Center, Power Control Panel, PLC Control Panel, Distribution Panel, AC & DC Drive panel, Timer & Multi Timer Controls, Annunciator Panel, Crane Control Panel, Soot Blower Panel, Heat Tracing Panel, Junction box.

We are supported by a team of highly qualified and experienced technicians who helps in executing a perfect product range that best fit to customers expectations. Our qualified engineers are backbone of the company who enables us to accomplish the project perfectly and within the stipulated time frame matching to client's specifications / If client will not provide specification we will follow our standard specification.

We are expecting your enquiry to quote best price & become a vendor .
Please find some Photo's of our Product to show our Quality & We also Proud to inform your that we are Approved vendor of L&T supplied more panels indoor , outdoor Panels & also supplied panel to Kalpakkam Bhavani Power Plant.

We expect become a approved vendor of you for our best service.

Product Details:

We are committed in manufacturing Electrical Power Panels that are best in technology and available at competitive prices. Fully equipped to produce quality designs and assembled systems which comply with all international standard we avail our electrical power panel to our customers as per their specific requirements.

Product Details:

We are one of the recognized names in the industry for designing, keeping in mind the specific requirements of the clients, and providing an array of Electrical Panels some of which are listed below. These panels are made of good quality materials in accordance with industrial quality standards. These find their application in commercial buildings, hospitals, industries, dairies, telecommunications, research laboratories etc.

Synchronizing Panel:
Synchronizing Panel works between two or more different power sources like DG sets to manage power supply. Synchronization helps in making different DG sets behave as a virtual single unit and eliminates subdivision of total load. It helps in transferring load from one unit to another as during service period, so that the unit requiring service can be easily shut off. In this way the critical load need not be interrupted and there is no production loss. During low load we can run any single unit, and synchronize more units as the load increases. This can be manual or automatic.

LT Panel and HT Panel :
LT Panel is an electrical distribution board that receives power from generator or transformer and distributes the same to various electronic devices and distribution boards. Such panels are used in industries both for internal and external use and, therefore, they are quite rugged to withstand different climatic conditions. Our LT panels are designed to work with low electricity consumption that makes them cost effective

HT Panel is like LT Panel except that it is used for high tension cables.

APFC (Automatic Power Factor Control) Panels :
These panels are used in commercial buildings and industries where there is fluctuation in voltage and power supply. The electrical load required by a unit depends upon the type of machineries, cooling plants and other devices installed. There is always a possibility of damage of these equipments if power fluctuates. In case of fixed loads they can be safeguarded using capacitors, but in case of varied loads, a mechanism to switch in and switch out the capacitors is required which is basically handled using APFC panels.

PCC (Power Control Center) Panels :
Its basic function is to control power supply to various units and equipments as per their load requirement so that they can work in harmony.

MCC (Motor Control Centre) Panel :
These are effectively used with motors or submersible pumps to provide sufficient protection from overloads and short circuits. These are high on performance, require low maintenance and can withstand extreme temperature variations.

Lighting Control Panels :
We can design and supply Distribution & Lighting Control Panels, which find application in plants for distributing power in the lighting system, keeping in mind the specific requirements of the clients.

VFD Control Panels :
These are designed to control the speed of electric motor and feed pump. They are widely used in drilling, pumping and other large machine applications. The VFD panels are widely used in tube mills, paper mills, extruder plants, rolling Mills, cable industry and CTL Lines. They are even installed in hospitals, business houses and other public places. VFD control panel are designed to match variable speed requirements of a process unit and so are vigorously tested on various speed parameters.

Feeder Pillar Panels :
The feeder pillar panels are used to terminate and distribute the control circuits. These are used in almost all the industries, townships and housing societies to put all the cut-outs together.

Product Details:

Leveraging on our experience and expertise, we have been able to offer superior range of Low Tension Panels. Following industry standards and safety norms, the range is manufactured using finest grade raw material and hi-tech machines. Available in standard and custom designs, our entire range is offered at market leading prices.

Product Details:

Real Time Power Factor Correction System Panel (RTPFC): We manufacture APFC & RTPFC (thyristor based power factor correction panels) panel as per our customers’ requirement. Panel is available in both compartmental as well as non-compartmental construction. We have supplied single panels with 24 stage & 2000 kvar capacitors.

Product Details:

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.

Product Details:

We offer Process Control Panels which are used for diverse industrial applications and provide reliable and effective service. These panels are manufactured as client's specifications and requirements which very well meet with the industry demands. These control panels are fabricated so that these deliver long lasting service at cost effective prices and even do not demand maintenance.

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.