Industrial Transformers

Product Details:

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.

Product Details:

This is an advanced version of Isolation Transformer. Construction of this is very different from the regular isolation transformer. In this secondary coils are split (or primary and secondary coils) as two or more coils according to the capacity of the transformer. The shielding method is also different because of the construction style. There is an inductance created between the coils because it is split. This inductance will give you more noise attenuation. As primary coil is not wound on top of the secondary coil the coupling capacitance is less. This is mainly required for wireless stations and costly life saving medical equipments.

Advantages Of Ultra Isolation Transformer:

• High noise attenuation level even in the high frequency application
• Reduced coupling capacitance
• Core will not saturate even if the applied voltage is high
• Suitable for higher harmonic area installation
• Because of the lesser heat dissipation the life of the transformer is very high

Additional Information:

• Item Code: SEI
• Production Capacity: 25/Month
• Delivery Time: 2 Days

Product Details:

Details:

• Multiple Shielding Techniques employed to reduce the inter winding capacitance to below 0.005 picofarad and increases DC Isolation to over 1000 Megaohms.
• Technically any transformer that has no direct current path between its primary & secondary windings provides isolation from any kind of leakage in Current, Spikes/Surges produced in the system. Provision of electrostatic shield in between primary & secondary winding depends upon its construction, specification & performance characteristics.
• Isolation Transformer are being used to protect Electronic & Sophisticated equipments, CNC Machines from the excessive line voltage transients, spikes / surges produced in the system. Electrostatic shielding helps in grounding these spikes & not allowing to pass on to the secondary side of the transformer.
• Furnace Transformer are built in delta / star connection with neutral as floating & electrostatic shielding is used to protect the furnace from any kind of Earth Fault Tripping.

Product Details:

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.

Product Details:

This is an advanced version of Ultra Isolation Transformer. Construction of this is very different from the regular isolation transformer. In this secondary coils are split (or primary and secondary coils) as two or more coils according to the capacity of the transformer. The shielding method is also different because of the construction style. There is an inductance created between the coils because it is split. This inductance will give you more noise attenuation. As primary coil is not wound on top of the secondary coil the coupling capacitance is less. This is mainly required for wireless stations and costly life saving medical equipments.

Additional Information:

• Item Code: SEIT
• Delivery Time: One Day

Product Details:

AC Load Bank

AC load bank main used to test the capability and aging degree for high-power ups on-line, inverter, switch power and diesel generator set for electric power, telecom department and manufacturer. It can ensure the reliability of constant power charge that adopts uniformly stepped power input, energy consumption work model and forced air-cooling model. It is of high power density, no red hot phenomenon and automatic protection function overheated. It can't be overheated and broken when the fans stop working. The complete machine can be operated simply and maintain convenient that adopts module design. It can test voltage and current according to client's request, and provide scientific test measures for high-power AC equipment.

Salient Feature:
1. Users can set adjustable discharge power according to capability parameter and test request.
2. Discharge time can be set: Load can be closed time out.
3. Voltage and current value can be displayed with digital meter.
4. The complete machine is of resistance breaking automatic overheated adopts new power consumption component.
5. AC load bank is of all kinds of specifications and series, and include resistance, inductive and capacitive load.
6. it’s of machine combination function.

Additional Information:

• Production Capacity: 30
• Delivery Time: 15days

Product Details:

What is an Isolation Transformer ? - its Function & Uses

A transformer is a static device, that transfers electrical energy from one circuit to another without any physical connection. It works on the principle of magnetic induction, which induces emf in another circuit by means of a magnetic field without changing the frequency.

Since the transformer's primary and secondary circuits are electrically isolated. Hence all the transformers we use in transmission and distribution networks are called isolation transformers.

A transformer is a static device, that transfers electrical energy from one circuit to another without any physical connection. It works on the principle of magnetic induction, which induces emf in another circuit by means of a magnetic field without changing the frequency.

 

Since the transformer's primary and secondary circuits are electrically isolated. Hence all the transformers we use in transmission and distribution networks are called isolation transformers.
It mainly consists of two inductive coils that are electrically separated but magnetically linked through a path of low reluctance as shown in the figure. When one coil of the transformer is connected to an ac supply mains, an alternating flux is set up in the laminated core, most of this flux links with the other coil and produces mutually induced emf (according to Faraday's Laws of Electromagnetic Induction).

The primary winding is connected to the supply mains and the secondary winding is connected to the load circuit.

 

When the transformer raises the voltage i.e. when the output voltage of a transformer is higher than its input voltage, it is called the step-up transformer, and when it lowers the voltage i.e. when its output voltage is less than the input voltage it is called a step-down transformer.

Note :

 

 The transformer must not be connected to a dc source. If the primary winding of a transformer is connected to a dc supply, then the flux produced will remain constant in magnitude and therefore no emf will be induced in the secondary winding. The primary winding gets short-circuited due to low resistance winding and draws a high current which may damage the winding.

Product Details:

This is an advanced version of Ultra Isolation Transformer. Construction of this is very different from the regular isolation transformer. In this secondary coils are split (or primary and secondary coils) as two or more coils according to the capacity of the transformer. The shielding method is also different because of the construction style. There is an inductance created between the coils because it is split. This inductance will give you more noise attenuation. As primary coil is not wound on top of the secondary coil the coupling capacitance is less. This is mainly required for wireless stations and costly life saving medical equipments.

Advantages Of Ultra Isolation Transformer:

• High noise attenuation level even in the high frequency application
• Reduced coupling capacitance
• Core will not saturate even if the applied voltage is high
• Suitable for higher harmonic area installation
• Because of the lesser heat dissipation the life of the transformer is very high

Product Details:

An isolation transformer is a transformer, often with symmetrical windings, which is used to decouple two circuits. An isolation transformer allows an AC signal or power to be taken from one device and fed into another without electrically connecting the two circuits. Isolation transformers block transmission of DC signals from one circuit to the other, but allow AC signals to pass. They also block interference caused by ground loops. Isolation transformers with electrostatic shields are used for power supplies for sensitive equipment such as computers, Lab Instruments, CNC Machines, Medical Equipments, etc.

Get Best Price Of The Step Down Small Distribution Transformer.

Product Details:

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.

Product Details:

Isolation Transformers are used for testing applications where variable output is required from 0 to any voltage. These kind of transformers are widely used in transformer / motor / generator manufacturing units to perform various electrical tests.

The construction of these variable transformers is very simple & consists of Buck/Boost Double Wound Transformer and +/- Type linear rolling contact regulator for stepless control. 

Product Details:

We manufacture wide range of Variable Auto Transformers suitable for indoor & outdoor applications with wide current range from 4A to 1000A both in Air & Oil Cooled. SAKTHI has supplied thousands of these transformers to various industries in India. Quality of SAKTHI transformers are well patronized with repeat orders from our customers. The plant is well equipped with most modern machinery & test equipments to conduct tests as per IS: 5142 with an installed capacity of 5000 units Per Annum.

Product Details:

Manufacturer Exporter of Servo Stabilizer, Static Stabilizer, Frequency Converter, Isolation Transformer, Online UPS, FCBC Battery Charger, Industrial Rectifier, APFC Panel, EV Charger,Engine Cranker,Load Bank, APFC Panels,vfd & etc.

Product Details:

We manufacture and supply Isolation Transformer that are effective for Isolating sensitive equipments from Line Voltage transients, spikes & D.C. leakage etc. These Isolation Transformers are specially designed for sensitive critical equipment’s like computers & peripherals, medical instrumentation, digital communication telemetry systems, CNC Machines etc. Our isolation transformers are also useful for stopping such disturbances generated by the noisy equipment load from being injected into the power line.