Sakthi Electrical Control

Substation Batter Chargers are widely used in various industries and educational Institutes.our brand name SAKTHI. The output voltage produced by our DC power supply ranges from 0 to 1000 V and output current ranges from 0 to 100 Amp. Our power supply is provided with Digital Panel Meters for voltage and current. Additionally, equipped with power supply overload and short circuit protection.

Automatic Battery ChargerOur product range includes a wide range of battery charger 12v 10a, automatic battery charger 24v 5a, automatic battery charger 24v 30a, battery charger 24v 10a, battery charger 24v 20a and automatic battery charger 12v 2a.

Specification

• Input Voltage 150-300 V AC
• Output voltage
• Float Mode 13.4 V DC
• Boost Mode 13.9 to 14 V DC
• Inrush Current Limited by NTC Thermister
• Charging current in boost mode 10 amps
• Charging current in float mode 0 to 4 amps
• Operating Temperature 0 TO 50 DEG C
• Leakage current <2 mA at 230 vac
• Vibration 10-500 Hz 2G 10 min/1cycle 60 mins each along XYZ axis
• Protections
• Input under voltage Cutoff level 140 VAC. Turn on voltage 160 VAC
• Input over voltage 300 V AC units shuts off if voltage goes above this value
• Output over voltage (Batt charger included) 15.5 V DC
• Output short circuit and overload Continuously protected
• Battery reverse polarity Protected latching mode
• Current drawn by charger from battery Draws zero current from the battery under any circumstances
• Externally Induced Over voltage Protected against output overvoltage caused by parallel connection of alternator etc
• Annunciation Potential free NO /NC contact for charger On/ Fail indication
• Indication Mains On, Float, Boost, and Battery Reverse
• Line Regulation <1%
• Load regulation <1%
• Ripple and noise 150 mv p-p
• Isolation between Input & Output 2000V AC
• Input & Earth 1500V AC
• Output & Earth 1500V AC

Additional Information:

• Production Capacity: 100

A battery charger, recharger, or simply charger, is a device that stores energy in a battery by running an electric current through it.
The Series PCBC Multi-purpose battery chargers are specifically designed to efficiently charge batteries within charging stations. To ensure reliable and safe operation, these chargers incorporate a heavy-duty copper double-wound transformer, which effectively steps down the AC supply. Multi-Purpose Battery Charger stepped-down AC power is then rectified using a full wave bridge rectifier, ensuring a smooth and consistent DC output. The charging process is further enhanced by the inclusion of selector switches, which allow users to choose the desired output voltage and current from predefined tables. To facilitate easy monitoring of the charging process, these chargers are equipped with dedicated amps and volt meters, enabling instant measurements and ensuring accurate charging. Furthermore, the chargers feature both input AC and output DC fuses, providing an added layer of protection against electrical faults and overloading.

Application

These chargers are most suitable for battery charging shops, maintenance shops, repair shops, etc. where the number and size of batteries may regularly vary.

battery charge  48v/15a

Additional Information:

• Item Code: EV4815
• Production Capacity: 500
• Delivery Time: 10days