1. What is Servo Voltage stabilizer?A. Servo Voltage Stabilizer uses an advance electronic controlled servo motor concept to govern a motorized variable transformer. Because of the motors involved, there is a small delay in voltage correction. However, output voltage accuracy is usually ±1% with input voltage changes of up to ±50%. This type of technology tends to be extremely effective when considering large three phase applications, as it is able to maintain its accuracy of all these phases, despite of input voltages balance and load balance at any power factor.
2. What is the need of Servo Voltage Stabilizer?A. Highly fluctuation in AC supply is a common phenomenon in whole country. The voltage requirement of different electrical appliances is vary to a great extent. The electronics equipment like spectrophotometers, PH-Meter, X-Ray plant, recorders are all affected by high main voltage, whereas the refrigerators, deep freezers, incubators and other compressors are affected by low main voltage. How ever in industries, which are running 24 hours, also affected by this fluctuation voltage. So to achieve constant voltage Servo Stabilizers are used.
3. Whom to trust, there are several other manufacturers?A. 50% of them are FRAUDS. Making false promises. They sell products and not their benefits.
4. How to select Servo Voltage Stabilizer?A. When you select any stabilizer it requires some data as follows:
- Input Voltage range
- Output Voltage range
- KVA rating
- Type of load: balance/unbalance
- Type of voltage: balance / unbalance
- Type of protection required
- Type of cooling: air / oil
5. What is the main function of the Stabilizer?A. The main function of the Stabilizer is to stabilize the voltage & safeguard the electrical equipment’s. Energy saving is an added advantage.
6. Which protection to use in your Stabilizer?A. We provide protection against short circuit, over load, over voltage/under voltage and also if customers have any specific requirement.
7. What is the efficiency of your Stabilizer?A. The efficiency of our Stabilizer is more than 97% in comparison with other type available in the market.
8. What is used for control?A. A solid state, plug in type printed circuit Board (PCB) is used for control.
9. What is the rate of correction?A. Rate of correction is 10 to 50 volts/second.
10. How will I select stabilizer rating for my home/office?A. Before selection the stabilizer you need to know how much power you use. By taking an inventory of all the essential electrical loads in your house / office, and doing a basic electrical load evaluation, you can get a good idea how much power your system needs to produce. Second, you have to know about the power Fluctuations situations also that means what voltage minimum / maximum you are getting from the main A.C. supply. In brief, you have to select the Input Voltage window and the power consumption of your appliance.
Note : we reserved the right to change any/all the information without prior notice.
